Christmas Crafting DIY holiday diys

DIY 3D Gold Christmas Tree Topper or Home Decor Accent

DIY Gold Star Tree Topper 3d pipe cleaners

This is the faux tree that Micheal’s sent me to decorate last year, and because it’s too small for our living room now, it gets to make the upstairs hallway merry and bright! And since the upstairs hallway is filled with the furnishings that once belonged in our Game Room/Den in our old house, including our gold tree stumps, I went with a gold and white themed tree to match. AND I thought I had an old gold and white tree topper to use, but I did not. SO I had to make one… and originally I made a simple, flat star from pipe cleaners that I was going to share… however, when I was editing my photos for my DIY Geo Ornaments yesterday, I conceptualized an entirely new one with dimension. And I love it… And here it is!

What You’ll Need…

DIY pipe cleaner christmas ornaments-1

  • Metallic pipe cleaners
  • Wire cutter
  • Wire {I used 21.9m} optional, but makes it easier

 

Steps…

DIY Gold Nautical 3D Star tree topper-1

You’re going to need about 17 pipe cleaners for this + one more to use as structural engineering 😉

DIY Gold 3D Star Tree Topper-2

You’re basically making 6 large triangles… begin by bending two pipe cleaners into V’s and the third into a box or rectangle

NOTE: Two of your triangles will not have the square/rectangle bases {though I realized this later}

DIY Gold 3D Star Tree Topper-3

Using your metallic wire, close off your square or rectangle.

Now bend the edges of your V’s at the ends and attach them to the larger sides of your square/rectangle.

DIY Gold 3D Star Tree Topper-4

Fold your V’s up and bind them together with your wire…

DIY Gold 3D Star Tree Topper-5

Make 6 of these … again, two of them don’t actually need the square/rectangle part, so just create the double V’s attached at the top.

DIY Gold 3D Star Tree Topper-6

You will attach your four triangles together at the corners

DIY Gold 3D Star Tree Topper-7

Like this…

DIY Gold 3D Star Tree Topper-8

It will become a 3D star with four points… then with your remaining double V’s, attach them just like you did on the others, but to the two open spaces left on your “star”. Basically adding points to the front and back.

 

And… Voila!

DIY 3d gold christmas tree topper-1

Since it’s open, you can just slide it over the top of your tree and set it how you like it best!

diy 3D Christmas Tree Star Topper

gold star tree topper DIY 3d pipe cleaner

You can also use it as decor… and make a smaller one as its companion!

gold 3d star decor diy-3

Though the angle isn’t quite right in the photo above, it’s very cool just sitting on a table or stack of books.


 

This is DIY #8 of 30… Click Below to see them all!


30 days of DIY december 2013-for posts

Have Fun!

* Find all my DIYS here
* Find my Holiday & Christmas DIYs here

 

Maegan Tintari

LA native & lifestyle blogger Maegan Tintari writes daily at ...love Maegan.com sharing beauty & style secrets, including fashion DIYs, how-to nail art manicures, hair tutorials, recipes & home decorating ideas, as well as a look into her personal life, her journey & battle with infertility & recent relocation to the mountains by a lake in search of a better life with her adorable French Bulldog brothers, Trevor and Randy.

You may also like...